ResMed AirFit P10 Singapore: Price, Fit & Buy Guide

Key takeaways

• The ResMed AirFit P10 is a minimalist nasal pillows mask with QuietAir venting rated at 21.4 dBA and a very lightweight design of about 45 g.
• Comooz’s current confirmed bundle prices are ResMed AirSense 10 AutoSet Bundle at $1,868 nett and ResMed AirSense 11 AutoSet Bundle at $2,068 nett, each including built-in humidification and a fitted mask.
• Comooz offers a 5-night CPAP trial that is not free; it requires deposit + mask cost + $98 return fee.
• Standard AirFit P10 setups generally connect to standard CPAP tubing, while the ResMed AirMini uses its own dedicated mask system rather than the standard setup.
• Comooz, a Singapore CPAP provider (UEN 201808754M), operates from 151 Chin Swee Rd, #02-03, Singapore 169876 strictly by appointment.

What Is the ResMed AirFit P10 Nasal Pillows Mask?

The ResMed AirFit P10 is a nasal pillows CPAP mask. It seals at the nostril openings using soft silicone pillows instead of covering the whole nose or the mouth.

That low-contact design is the main reason people searching for resmed airfit p10 singapore consider it first. Comooz, a Singapore CPAP provider (UEN 201808754M), commonly discusses the AirFit P10 with users who already have a doctor’s diagnosis of obstructive sleep apnea from polysomnography or a home sleep test.

A home sleep test is an overnight diagnostic study done outside the sleep lab. At Comooz, Type 3 home sleep tests are available on demand, while Type 2 home sleep tests are arranged manually with a trained specialist. If you have not been diagnosed yet, start with a home sleep test in Singapore or speak to a sleep physician.

Key Features: Why Singapore CPAP Users Choose the AirFit P10

The AirFit P10 is chosen mainly for quietness, low weight, and simplicity. It is often a strong fit for users who want the least bulky mask style that still gives a direct seal at the nares.

• QuietAir woven-mesh venting: The AirFit P10 is rated at 21.4 dBA. Its venting disperses exhaled air more gently, which may feel less drafty to a bed partner.
• Minimal-contact frame: There is no forehead support and very little on the cheeks, so the field of view stays open for reading or watching TV before sleep.
• QuickFit split-strap headgear: The elastic headgear slips on easily. Spreading the back straps apart increases tension; bringing them closer together reduces tension.
• Dual-wall nasal pillows: The pillows seal at the nostrils and usually move reasonably well with normal position changes.
• Simple 3-part construction: Cushion, headgear, and short tube assembly are straightforward to separate for routine washing.

Who the AirFit P10 is for

The AirFit P10 is usually best for nose breathers, frequent side sleepers, users bothered by bulky masks, and people who want a lighter interface than a nasal mask or full face mask.

Who the AirFit P10 is not for

The AirFit P10 is usually less suitable for regular mouth breathers, users with significant nasal congestion, people with repeated mouth leak, or anyone who simply dislikes pillows sitting at the nostrils. In those cases, a different mask style, humidification review, or pressure review may be more suitable, especially after titration or if therapy data shows persistent residual events.

ResMed AirFit P10 vs. AirFit N30 vs. AirFit P30i

The best mask depends on where the cushion sits and where the tube exits. The AirFit P10 seals at the nostrils, the N30 rests under the nose, and the P30i uses nasal pillows with a top-of-head tube route for more movement freedom.

Nasal pillows vs full face: which is right for you?

Nasal pillows masks like the P10 usually work best when you can breathe comfortably through your nose during sleep. Full face masks are often better when mouth leak is frequent, nasal obstruction is significant, or treatment becomes unstable with a nasal interface.

EPAP is the pressure you breathe out against. If congestion, dryness, or leaks make exhalation feel harder, comfort can drop even when the pressure setting itself is appropriate. In practice, clinicians may review mask type, humidification, and pressure range together rather than changing only one variable.

Pricing, Accessories, and CPAP Trial Options in Singapore

The key pricing point is simple: Comooz does not publish a confirmed standalone AirFit P10 article price here, but it does publish current machine bundle pricing and trial terms. If you want the resmed airfit p10 singapore setup, you can ask about fitted-mask availability with a bundle, rental, or trial.

Both current bundle options include the main unit, power supply, built-in humidification, tubing, filter, carrying case, and a fitted mask.

The AirSense 11 AutoSet adds a full-colour touchscreen, Climate Control with integrated humidifier, over-the-air updates, and Care Check-in. The AirSense 10 AutoSet uses a monochrome display with dial, integrated HumidAir chamber, built-in cellular connectivity for myAir, and a proven robust workhorse design.

If you are comparing complete setups rather than just a mask, browse available CPAP machines in Singapore. If you are still unsure whether CPAP is appropriate, confirm your diagnosis and AHI severity with a doctor first.

How the AirFit P10 Fits Into Sleep Apnea Treatment

The AirFit P10 is a mask, not the treatment machine itself. It delivers therapy from a CPAP or AutoSet device after obstructive sleep apnea has been diagnosed and pressure has been prescribed, reviewed, or titrated.

AHI means apnea-hypopnea index, which is the number of apneas and hypopneas per hour of sleep. Common thresholds are AHI 5 for mild sleep apnea, AHI 15 for moderate sleep apnea, and AHI 30 for severe sleep apnea.

A Type 3 home sleep test usually measures airflow, effort, pulse, and oxygen-related signals. Polysomnography is the more comprehensive lab-based sleep study. Treatment decisions should come from a doctor or sleep physician, especially if the pattern suggests central events, if titration is still needed, or if bilevel support such as an AirCurve is being considered with separate inspiratory pressure and EPAP.

How to Fit, Adjust, and Clean Your AirFit P10 Mask

A good AirFit P10 fit should feel gentle, stable, and not over-tightened. Most leak problems happen because the pillow size is wrong, the pillows are not seated properly, or the headgear is pulled tighter than necessary.

1. Position the nasal pillows under the nose with the correct left-right orientation.
2. Pull the QuickFit headgear over the head.
3. Adjust the rear split straps slightly: farther apart for more tension, closer together for less tension.
4. Connect the short tube to your standard CPAP hose if you are using a standard setup.
5. Start therapy and make small adjustments until the seal feels stable and comfortable.

Daily cleaning routine

• Daily: Wash the cushion and short tube in warm water with mild detergent, rinse thoroughly, and air-dry away from direct sunlight.
• Weekly: Hand-wash the headgear and let it dry fully before reuse.

Common fit problems and what to check

If the mask whistles, shifts, or irritates the nostrils, check pillow size before tightening harder. If your nose becomes dry or blocked, review humidification settings on the machine.

Users pairing the P10 with the AirSense 11 often benefit from integrated humidification and Climate Control adjustments. If dryness persists, pressure comfort and leak patterns may also need review.

Buying the ResMed AirFit P10 in Singapore: What to Check

When buying the resmed airfit p10 singapore mask, users should check authenticity, fitting help, compatibility, and support after the sale. The right mask affects comfort, leak control, and long-term adherence more than many first-time buyers expect.

A practical buying check is to confirm whether you need only a mask replacement or a complete therapy setup. If you are newly diagnosed, bundle, rental, or trial routes may be more useful than buying a mask in isolation.

Ask these practical questions before purchase:

• Is it the standard AirFit P10 or a version intended for another setup such as the AirMini system?
• Will you get help choosing pillow size and adjusting the split headgear correctly?
• If you are new to therapy, can the mask be fitted as part of a bundle, rental, or paid 5-night CPAP trial?
• Have your diagnosis, AHI, and pressure settings already been reviewed by a doctor or sleep physician?
• If you develop mouth leak or nasal blockage, what alternative mask options are available?

For education on mask choice, CPAP comfort, humidification, and therapy basics, visit the Comooz learning centre. To arrange a fitting at 151 Chin Swee Rd, #02-03, Singapore 169876, contact Comooz directly through the contact page; showroom visits are strictly by appointment.

Frequently asked questions

Where can I buy a genuine ResMed AirFit P10 mask in Singapore?

You can buy a genuine ResMed AirFit P10 through a local CPAP provider such as Comooz in Singapore. Buying locally helps with authenticity, fitting guidance, compatibility checks, and after-sales support. Comooz operates from 151 Chin Swee Rd, #02-03, Singapore 169876 by appointment only, and enquiries can be made through the contact page or by phone.

How do I know which AirFit P10 cushion size I need?

The correct AirFit P10 pillow size should seal gently without pinching the nostrils or forcing you to over-tighten the headgear. If the pillows feel unstable, whistle, or irritate the nares, the size may be wrong. If you are unsure, ask your CPAP provider or sleep specialist to assess fit during setup.

Is the ResMed AirFit P10 quiet enough for my sleep partner?

The AirFit P10 is widely chosen for quiet operation, with QuietAir woven-mesh venting rated at 21.4 dBA. That low vent noise is one of its main selling points. In real use, perceived noise still depends on fit, room acoustics, leak control, and where the CPAP machine is placed.

Is the AirFit P10 compatible with my CPAP machine?

The standard AirFit P10 generally works with many standard CPAP and APAP setups, including ResMed AirSense 10 AutoSet and AirSense 11 AutoSet systems. However, the AirMini travel CPAP uses its own dedicated version rather than a standard mask setup, so you should confirm the exact product before buying.

How often should I replace my AirFit P10 nasal pillows and headgear?

Replacement timing depends on wear, washing habits, skin oils, and whether the mask still seals comfortably. In practical terms, users usually reassess cushions when comfort or seal quality declines and reassess headgear when elasticity weakens. If leaks rise despite correct fitting, it is time to review the parts with your CPAP provider.

Can I test the AirFit P10 mask before committing to a purchase?

Yes. Comooz offers a 5-night CPAP trial, but it is not a free trial. The current structure is deposit + mask cost + $98 return fee. This can be useful if you want to test comfort, seal, and tolerance at home before deciding on purchase or monthly rental.

Should I choose the AirFit P10 or a full face mask?

Choose the AirFit P10 if you are mainly a nose breather and want the lightest, least bulky interface. A full face mask is often better for persistent mouth breathing, repeated mouth leak, or frequent nasal blockage. If your sleep study, titration, or treatment data is complex, ask your doctor or sleep physician before changing mask type.

WhatsApp Comooz or call +65 8892 2591 to check current resmed airfit p10 singapore availability, book a fitting, or arrange a home sleep test or CPAP trial.

Talk to Comooz

Comooz is a Singapore CPAP provider (UEN 201808754M). For pricing, a home sleep test or a CPAP trial, contact us at support@comooz.sg or +65 8892 2591. Showroom visits at 151 Chin Swee Rd, #02-03, Singapore 169876 are strictly by appointment.

Related guides

• ResMed Trial in Singapore: Cost, Process & Options
• AirSense 11 Specs in Singapore
• AirCurve vs AirSense in Singapore
• ResMed P10 vs N30i in Singapore
• More cpap machines guides
• Ready to act? CPAP machines available in Singapore or WhatsApp Comooz at +65 8892 2591.