ResMed AirFit F20 vs ResMed AirFit P10: Which CPAP Mask Is Best in SG?

For the complete Singapore guide, see our full breakdown of cpap mask singapore.

Key takeaways

• The ResMed AirFit F20 is a full face mask that covers the nose and mouth, while the ResMed AirFit P10 is a nasal pillows mask that seals only at the nostrils.
• For many users, the F20 is easier when mouth leaks or congestion are common, while the P10 is often preferred by reliable nose breathers who want a lighter setup.
• AHI 5/15/30 is the common sleep apnea severity framework, but mask choice should follow your breathing pattern, titration outcome, and comfort rather than AHI alone.
• Comooz, a Singapore CPAP provider (UEN 201808754M), offers the ResMed AirSense 10 AutoSet Bundle at $1,868 nett and AirSense 11 AutoSet Bundle at $2,068 nett, both with built-in humidification and a fitted mask.
• Comooz’s 5-night CPAP trial is not free and involves a deposit, mask cost, and a $98 return fee.
• Home sleep testing can be arranged before treatment: Type 3 is available on demand, while Type 2 is arranged manually with a trained specialist.

Design & facial coverage: full face vs nasal pillows

The biggest difference in the resmed airfit f20 vs resmed airfit p10 decision is facial coverage. The F20 covers the nose and mouth, while the P10 seals only at the nostrils.

The ResMed AirFit F20 is a full face CPAP mask. It is often chosen by people who mouth-breathe during sleep, have frequent nasal congestion, or want a mask that can keep working even if the jaw drops open overnight when fitted properly.

The ResMed AirFit P10 is a nasal pillows CPAP mask. It uses soft pillow inserts that sit at the nostril entrance, so facial contact is minimal and the overall feel is lighter than a traditional nasal or full face design.

A simple way to frame it is this: the F20 prioritises breathing flexibility and seal stability, while the P10 prioritises minimalism and low-profile comfort.

If you wake with a dry mouth, snore with your mouth open, or alternate between nose and mouth breathing, the F20 is often the safer starting point. If you are a dependable nose breather and dislike facial bulk, the P10 is often the better match.

For broader mask and therapy education, Comooz also publishes guides in its sleep apnea learning centre.

Feature-by-feature comparison: F20 vs P10

For most shoppers, the fastest answer is a side-by-side comparison. The table below focuses on the factors that usually decide long-term comfort and compliance in Singapore.

The P10 is usually chosen for simplicity. The F20 is usually chosen for reliability when leak risk is higher.

If you are also comparing machine options, see Comooz’s CPAP machine range in Singapore.

Performance & comfort: mouth breathing, pressure, and sleep position

Mask performance means the mask can maintain your prescribed therapy through the night. In practice, the right mask is the one that controls leaks and remains comfortable enough to use consistently.

The AirFit F20 often has the edge for mouth breathing because it seals both the nose and mouth. If your jaw relaxes during sleep, a full face design is generally more forgiving than a nasal pillows mask.

The AirFit P10 performs best when you can breathe through your nose all night. If your mouth opens, therapy pressure can escape, which may lead to dry mouth, higher leak readings, and less effective treatment.

Pressure tolerance also matters. Some users find the F20 easier at higher settings because airflow is delivered through a larger interface, while the P10 can feel more concentrated because air enters directly through the nostrils. That does not make the P10 unsuitable; it means comfort depends more on your nasal tolerance.

Sleep position changes the answer too:

• Side sleepers often prefer the P10 because there is less mask frame against the pillow.
• Restless sleepers often like the P10 for the same low-profile reason.
• Back sleepers may do well with either mask.
• People with frequent nasal blockage usually do better with the F20.

The F20 includes ResMed’s QuietAir venting, and the P10 is also widely chosen for quiet diffused venting. For most people, the more important question is not just sound level but whether the mask stays sealed without disturbing sleep.

Who each mask is for — and not for

A good CPAP mask match starts with who the mask is designed for. This section gives the clearest buyer shortcut in the resmed airfit f20 vs resmed airfit p10 choice.

Choose the AirFit F20 if

• you often breathe through your mouth
• you have regular nasal congestion or allergy flares
• you want a more forgiving seal
• you dislike the feeling of direct air into the nostrils
• your clinician has set pressures that feel hard to tolerate through nasal pillows

Choose the AirFit P10 if

• you are a strict nose breather
• you want the lightest, least intrusive mask
• you sleep on your side and dislike mask bulk on the pillow
• you travel often and want a simpler setup
• you tolerate direct nasal airflow comfortably

The F20 may not be ideal if

• you are sensitive to facial coverage
• you want the smallest possible mask
• you feel claustrophobic in full face designs

The P10 may not be ideal if

• your nose blocks easily at night
• you often wake with dry mouth from mouth leaks
• you need a mask that works well despite variable breathing patterns

If you are unsure, the safest path is to match the mask to your sleep study findings, breathing pattern, and titration plan with a sleep physician or qualified CPAP provider.

How sleep testing and titration affect mask choice

A CPAP mask should support the treatment plan that follows your sleep study. It should not be chosen on looks alone.

A home sleep test is a test done outside a sleep lab to screen for sleep-disordered breathing. A Type 3 home sleep test typically records fewer channels than full polysomnography, while a Type 2 setup is more comprehensive and is arranged manually by Comooz with a trained specialist.

AHI stands for apnea-hypopnea index. AHI is commonly grouped as 5 to 14.9 mild, 15 to 29.9 moderate, and 30 or more severe, but AHI alone does not decide between the F20 and P10. Breathing route, leak risk, congestion, and titration comfort are often more important for mask choice.

If a clinician prescribes AutoSet therapy, the machine adjusts pressure within a range during sleep. If you later need more complex support, a doctor may consider bilevel therapy with separate inspiratory support and EPAP, such as a titration pathway that leads to a device like the ResMed AirCurve 10 VAuto. That decision belongs with a doctor, not a retail fitting alone.

If you have not yet tested, Comooz can help arrange a home sleep test in Singapore.

Maintenance, humidification, and Singapore climate

Singapore’s heat and humidity affect mask comfort and seal life. Sweat, skin oils, and moisture can make both full face cushions and nasal pillows wear faster.

For the F20, wipe the cushion daily and inspect for softening, cloudiness, edge warping, or more leaks around the nose and mouth. For the P10, clean the pillow inserts and check whether they have become too soft or less springy at the nostrils.

Humidification can improve comfort, especially if you wake with dry nose or throat. Comooz’s current bundles include built-in humidification: the ResMed AirSense 10 AutoSet Bundle at $1,868 nett and the ResMed AirSense 11 AutoSet Bundle at $2,068 nett each include the main unit, power supply, built-in humidification, tubing, filter, carrying case, and a fitted mask.

The AirSense 11 AutoSet adds a full-colour touchscreen, Climate Control with integrated humidifier, over-the-air updates, and Care Check-in. The AirSense 10 AutoSet uses a monochrome display with dial, integrated HumidAir chamber, and built-in cellular connectivity for the myAir app.

If dryness or leaks continue, the problem may be mask type, humidity setting, or pressure comfort rather than the machine itself.

How to test the right mask in Singapore

The best way to confirm a mask is to test it under real sleeping conditions. A short showroom try-on helps, but overnight use often reveals mouth leaks, pressure intolerance, and side-sleeping issues more clearly.

Comooz, a Singapore CPAP provider (UEN 201808754M), offers a 5-night CPAP trial. It is not a free trial. The trial involves a deposit, mask cost, and a $98 return fee.

Comooz also offers monthly rental with 3-month offset rules toward purchase. That can be useful if you want more time to compare mask comfort before committing to a full setup.

The showroom is at 151 Chin Swee Rd, #02-03, Singapore 169876, strictly by appointment. You can learn more about the provider on the Comooz about page or use the contact page for appointments and support.

Frequently asked questions

Can I use the AirFit P10 if I tend to breathe through my mouth?

Usually not as a first choice. The AirFit P10 works best when you breathe through your nose throughout sleep, because mouth leaks can let therapy pressure escape and cause dry mouth. Some users try a chin strap under professional guidance, but habitual mouth breathers often do better with a full face option like the F20.

Which mask is better suited for high CPAP pressure settings?

Many users find the ResMed AirFit F20 easier to tolerate when pressure feels strong, because the airflow is delivered through a larger full face interface rather than directly into the nostrils. The AirFit P10 can still work well, but comfort depends on how sensitive you are to direct nasal airflow and how stable your seal remains.

How often should I replace cushions for the F20 and P10 in Singapore?

A practical range is 1 to 3 months for the F20 cushion and 1 to 3 months for P10 pillow inserts, depending on oils, humidity, leak rate, and wear. Singapore’s climate can shorten seal life, so replace based on performance and condition rather than waiting for a fixed calendar date.

Does the AirFit P10 work with the ResMed AirSense 10 and AirSense 11?

Yes. The AirFit P10 and AirFit F20 work with standard CPAP setups, including the ResMed AirSense 10 AutoSet Bundle at $1,868 nett and the AirSense 11 AutoSet Bundle at $2,068 nett. Both bundles from Comooz include built-in humidification and a fitted mask.

Can I test both masks before deciding which one to purchase?

Yes. Comooz offers a 5-night CPAP trial so you can assess comfort at home. It is not free and involves a deposit, mask cost, and a $98 return fee. This is often more useful than a brief in-store fitting because it shows how the mask behaves across a full night.

Is the AirFit F20 noisy for my sleep partner?

The AirFit F20 uses ResMed’s QuietAir venting and is generally considered quiet for a full face mask. The AirFit P10 is also known for quiet diffused venting. In real use, overall disturbance usually depends more on leaks and fit than on the published vent design alone.

WhatsApp Comooz or call +65 8892 2591 to compare the resmed airfit f20 vs resmed airfit p10, check mask fit, and arrange a CPAP trial in Singapore.

Talk to Comooz

Comooz is a Singapore CPAP provider (UEN 201808754M). For pricing, a home sleep test or a CPAP trial, contact us at support@comooz.sg or +65 8892 2591. Showroom visits at 151 Chin Swee Rd, #02-03, Singapore 169876 are strictly by appointment.

Related guides

• ResMed Trial in Singapore: Cost, Process & Options
• AirSense 11 Specs in Singapore
• AirCurve vs AirSense in Singapore
• ResMed P10 vs N30i in Singapore
• More cpap machines guides
• Ready to act? CPAP machines available in Singapore or WhatsApp Comooz at +65 8892 2591.